Shrink ratio: 3:1
UV and water resistance
Corrosion resistance
Polyamide hot melt adhesive prevents leakage of the gas inside the closure
The special internal single-end non-adhesive glue applying method can exactly fix the cable on the position
Mechanical damage resistance
The outer temperature sensitive paint is convenient for the instruction of heat shrink operation
| Property | Specification Requirement | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength | ≥10.3MPa | ASTM D2671 | ≥14MPa |
| Elongation at Break | ≥200% | ASTM D2671 | ≥400% |
| Elongation at Break After Aging | ≥100% | ASTM D2671 (150°C/168 hours) |
≥300% |
| Dielectric Strength | ≥19.7 kV/mm | ASTM D2671 | ≥20 kV/mm |
| Volume Resistivity | ≥10^14 Ω·cm | ASTM D2671 | ≥10^14 Ω·cm |
| Copper Stability | No corrosion | ASTM D2671 | No corrosion |
| Product Code | Before Shrinking (mm) |
After Shrinking (mm) | Standard Length (m) | |
|---|---|---|---|---|
| Inside Diameter (Min.) (D) | Inside Diameter (Max.) (d) | Wall Thickness (w) | ||
| ADW033 | 33 | 8 | 3.2 | 200 |
| ADW038 | 38 | 10.2 | 3.2 | 200 |
| ADW040 | 40 | 12 | 4.1 | 200 |
| ADW045 | 45 | 12 | 4.1 | 200 |
| ADW075 | 75 | 22 | 4.1 | 200 |
| ADW085 | 85 | 25 | 4.3 | 200 |
| ADW105 | 105 | 30 | 4.3 | 200 |
